Innovations
Products
show more >>
CRIP
The test bench of CR injectors
The test bench of CR injectors
Measurement takes place in an electronic measurement system. A software with test plans is included.
The CRIP test bench allows you to simultaneously check 4 injectors, as well as monitor the temperature of the test fluid at each injector.
The CRIP test bench uses a CR4-Tester device, which is designed to supply user-programmable Common Rail injector control signals to test their performance (shape and intensity of spray, volume performance).
Calibration oil from the tank flows through the intake filter, no
The CRIP test bench allows you to simultaneously check 4 injectors, as well as monitor the temperature of the test fluid at each injector.
The CRIP test bench uses a CR4-Tester device, which is designed to supply user-programmable Common Rail injector control signals to test their performance (shape and intensity of spray, volume performance).
Calibration oil from the tank flows through the intake filter, no
Mega Tester V3
The device for checking the electrical parameters
The device for checking the electrical parameters
The Mega Tester device is a software and hardware complex that allows you to: measure the capacitance of the piezoelectric element, measure the resistance of the piezoelectric element under voltage, measure the insulation resistance under elevated voltage and also form the injector control voltage to measure the stroke of the piezoelectric element and the gap between the piezo actuator and the pusher of injector hydraulic valve. The functionality of the device allows you to assess the damage degree of the p
CR4 Tester.PR
CR4 Tester.PR for testing injectors
CR4 Tester.PR for testing injectors
The device "CR4 Tester.PR" allows to test the diesel electro-controlled injectors of the Common Rail system, giving the user-defined necessary injector control signals and fuel pressure, by controlling the control valve.
Pressure control is carried out only by the standard high-pressure regulator installed on the rail, or on the CP1 pump.
When using a CP3 pump, it is necessary to install a rail with a high pressure regulator from the CP1 system. The “CR4 Tester.PR” device does not automatically control the
Pressure control is carried out only by the standard high-pressure regulator installed on the rail, or on the CP1 pump.
When using a CP3 pump, it is necessary to install a rail with a high pressure regulator from the CP1 system. The “CR4 Tester.PR” device does not automatically control the
DT-UNI Tester
The tester for fuel pumps
The tester for fuel pumps
The device "DT-UNI" allows you to:
• Control of the inline and distributor injection pumps with electronic controls;
• set any possible position of the slide valve
(dispenser);
• work with pumps in which the position sensor: inductiveor potentiometric;
• control voltage (handshake) feedback dispenser position sensor on the indicator;
• control the set control voltage to the metering device;
• control the value of the current through the metering winding;
• control the value of the fuel temperature in the pu
• Control of the inline and distributor injection pumps with electronic controls;
• set any possible position of the slide valve
(dispenser);
• work with pumps in which the position sensor: inductiveor potentiometric;
• control voltage (handshake) feedback dispenser position sensor on the indicator;
• control the set control voltage to the metering device;
• control the value of the current through the metering winding;
• control the value of the fuel temperature in the pu